LATHAM AXIAL-FLOW SUPERCHARGER

More like a positive-displacement Roots-type GMC blower than a Centrifugal McCulloch, the LATHAM AXIAL-FLOW SUPERCHARGER is a unique, beautifully machined, low-profile alloy ‘turbine’ with multiple sidedraft carbs.

LATHAM AXIAL-FLOW SUPERCHARGER

My first encounter with a LATHAM AXIAL-FLOW SUPERCHARGER was in the early 1960s when I was working on a story about a very special E-Type Jaguar being built by Al Garz in his sophisticated restoration/speed shop in Brooklyn, NY. The Jag was powered by a Latham-supercharged small-block Corvette engine and the story was for CARS Magazine.

This was long before engine conversion kits were available for putting American V-8s in Jaguars and everything about this car – from engine detailing to the complex chassis modifications – was concours quality. The car was being built for a wealthy sports car enthusiast living in Oyster Bay, NY. Since I knew little about the forced induction system at the time, I contacted Norman Latham at his West Palm Beach, FL facility. He sent me literature, photos of Latham installations on Fords, and Briggs Cunningham’s customized and modified ’62 Pontiac Grand Prix, photo below, powered by a 421-inch engine topped by an Axial-Flow with Webers. In addition to an impressive racing history, Cunningham built his own Cadillac & Chrysler Hemi-powered sports cars in West Palm Beach before Latham started supercharger production. Latham Supercharger Kits were available for popular OHV V-8 engines as well as earlier Ford Flatheads. Depending upon engine displacement and application, Kits utilized up to four sidedraft carburetors.

LATHAM AXIAL-FLOW SUPERCHARGER

Hagerty.com’s Kyle Smith tracks the history of the unique LATHAM AXIAL-FLOW SUPERCHARGER in A Turbine for Your Hot Rod? Latham Says Yes.  

Supercharging has interesting roots (pun intended) in the automotive world. The idea of pressure-feeding air into an engine for a car is only a few years younger than the automobile itself. The first production examples were available on Mercedes models in 1922, and it has only become more popular since. As with many examples of technology, there were some interesting attempts at supercharging that didn’t last and ended up on the side of the long road that is automotive history. One such example is the LATHAM AXIAL-FLOW SUPERCHARGER.

Supercharging an engine relies on the crankshaft to drive a compressor that forces air into the intake, effectively increasing the volumetric efficiency of the engine by cramming more air into the cylinders than it would pull in on its own during the vacuum created by the intake stroke. The most common forms of superchargers are centrifugal, Roots, screw, and scroll. Before the market settled on the common types we’re familiar with today, there were several efforts to create the next best thing. Norman Latham of West Palm Beach, Fl, hoped his new product would be a must-have performance bolt-on.

Latham’s idea was to create an axial supercharger. This is essentially a turbine, where the supercharger housing contains “fans” that can create positive manifold pressure. Latham’s design went into production in 1956 and was sold until 1965. It was radically different than a Roots or Centrifugal supercharger, yet also combined a few of the better parts of each. A Centrifugal supercharger was a bear to tune 70 years ago because carburetors were still the most popular way of mixing the air and fuel entering an engine.

Continue reading @ https://www.hagerty.com/media/automotive-history/a-turbine-for-your-hot-rod-latham-says-yes/?hashed_email=e323c71347790f699ba35a9dc01d49ac3f938885a7df6321087c8c9b4c0dd333&dtm_em=e323c71347790f699ba35a9dc01d49ac3f938885a7df6321087c8c9b4c0dd333

SHELBY-POWERED BIRDCAGE MASERATI

Three American racing legends – Carroll Shelby, Briggs Cunningham and Al Momo – joined forces in 1963, resulting in a SHELBY-POWERED BIRDCAGE MASERATI racecar.

SHELBY-POWERED BIRDCAGE MASERATI

Transplanting American V8 engines into imported sports racers gained popularity in the early-mid-1960s. American V8s were often inexpensive, simple to modify and maintain, and in many cases lighter than imports.  Most importantly, they produced maximum horsepower and torque at considerably lower and more useable rpm for improved performance and durability.

Ford’s lightweight 260-289 V8, which was elevated to international status by Carroll Shelby’s Cobras, caught the attention of Alfred Momo and Briggs Cunningham in 1963. Momo managed Briggs Cunningham’s racing team and operated a full sports car and racing services facility in New York City. Cunningham built sports cars and racecars in 1951-1955, took Corvettes to Le Mans in 1960 and was the highest-profile racing team owner-driver in the U.S in the late-1950s and early-1960s.

SHELBY-POWERED BIRDCAGE MASERATIIn 1963 Cunningham spent a lot of time racing Momo-prepared Maserati Tipos, also known as Birdcages because of their unique triangulated small-diameter tubular chassis construction. The original Tipo chassis weighed just 66 pounds and resembled a large birdcage. It was originally fitted with a three-liter DOHC V12 engine. While considered state-of-the-art because of unique space-frame construction, they were plagued with suspension failures leading to serious handling and reliability issues. At the time Maserati was cash-starved, negatively affecting racecar development.

Both Cunningham and Momo were aware of Shelby’s success with Ford-powered Cobras and decided to bring him in while Momo was rebuilding one of two Maserati Tipo 64 Birdcages (#64.002). It had been built in 1962 as a Tipo 63 and later returned to Italy for chassis updates, rear suspension change, weight reduction and relocation of the engine for better weight distribution.

SHELBY-POWERED BIRDCAGE MASERATIIts fully independent rear suspension was replaced with a De Dion setup located with its own tubular framework. Power came from a 60-degree 183-cubic-inch V12 with four cams and six Weber 35-DCV carburetors. Output was 320 horsepower at 8,200 rpm. This is the same engine used by Maserati in 1957 in its Formula One 250.Shelby suggested a 289-cubic inch Cobra competition engine that would put out more useable horsepower and torque at more than 1,000 rpm less than the V12. I spent a day in August 1963 at Momo Competition after the Shelby-Ford 289, fitted by Al Momo with four Weber 4610-M1 carburetors, was installed in the SHELBY-POWERED BIRDCAGE MASERATI and fired up. The 289’s headers were plumbed into rear exit quad megaphones. It had an incredible bark – much more raucous sounding than a competition Cobra. Rated at 340-horsepower at 7,000 rpm, the engine was fitted with ported and polished heads like the ones used on FIA Cobras, a Motorola alternator and Spalding Flamethrower ignition. It was shipped with an aluminum Cobra-Weber intake manifold sans carburetors, and a custom nine-quart oil pan.

Unlike previous Birdcages that Cunningham had raced, this was the first to utilize a De Dion rear suspension with a five-speed gearbox and an interchangeable Fifth gear. To adapt the Cobra engine, Momo chopped the Ford bellhousing and utilized a Maserati flywheel and clutch. Clutch and throttle, linkage were converted to hydraulic-assist utilizing slave cylinders. To compensate for the new powerplant, adjustable Armstrong shocks and beefier 42-mm knock-off hubs were added. An aluminum cross-flow radiator, aided by small vents in the aluminum rear body panels, cooled the fan-less engine. Ready to race, the SHELBY-POWERED BIRDCAGE MASERATI weighed in at 1,400 pounds, exactly one pound less than with the V12!With the help of Willem Oosthoek, author of Birdcage to Supercage and Larry Berman, Cunningham historian, we were able to track the Ford-powered Birdcage’s racing history. The first time out with Walt Hansgen driving, #64.002 took a Third overall at the Watkins Glen SCCA Nationals on August 24, 1963. Primary drivers were Cunningham, Augie Pabst and Paul Richards. Dr. Dick Thompson also spent some seat time in Tipo #64.002.

Over the years ownership of #64.002 passed from Cunningham to Pabst and then to Ham Vose. It competed at the Bridgehampton Double 500, Los Angeles Times GP at Riverside and many regional events in 1963. The last big race it ran was the USRRC event at Augusta. In later years, still fitted with the Shelby Cobra engine, it was on display at the Blackhawk Collection.

Checkout the history of the Maserati Birdcage @ https://en.wikipedia.org/wiki/Maserati_Tipo_61

COBRA IN A MASERATI BIRDCAGE!

Three American racing legends – Carroll Shelby, Briggs Cunningham and Al Momo joined forces in 1963, resulting in an exotic COBRA IN A MASERATI BIRDCAGE!

COBRA IN A MASERATI BIRDCAGE!

Transplanting American V8 engines into imported sports racers gained popularity in the early-mid-1960s. American V8s were often inexpensive, simple to modify and maintain, and in many cases lighter than imports.  Most importantly, they produced maximum horsepower and torque at considerably lower and more useable rpm for improved performance and durability.

Ford’s lightweight 260-289 V8, which was elevated to International status by Carroll Shelby’s Cobras, caught the attention of Alfred Momo and Briggs Cunningham in 1963. Momo managed Briggs Cunningham’s racing team and operated a full sports car and racing services facility in New York City. Cunningham built sports cars and racecars in 1951-1955, took Corvettes to Le Mans in 1960 and was the highest-profile racing team owner-driver in the U.S in the late-1950s and early-1960s.

In 1963 Cunningham spent a lot of time racing Momo-prepared Maserati Tipos, also known as Birdcages because of their unique triangulated small-diameter tubular chassis construction. The original Tipo chassis weighed just 66 pounds and resembled a large birdcage. It was originally fitted with a three-liter DOHC V12 engine, below. While considered state-of-the-art because of unique space-frame construction, they were plagued with suspension failures leading to serious handling and reliability issues. At the time Maserati was cash-starved, negatively affecting racecar development.COBRA IN A MASERATI BIRDCAGE!Both Cunningham and Momo were aware of Shelby’s success with Ford-powered Cobras and decided to bring him in while Momo was rebuilding one of two Maserati Tipo 64 Birdcages (#64.002). It had been built in 1962 as a Tipo 63 and later returned to Italy for chassis updates, rear suspension change, weight reduction and relocation of the engine for better weight distribution. Its fully independent rear suspension was replaced with a De Dion setup located with its own tubular framework. Power came from a 60-degree 183-cubic-inch V12 with four cams and six Weber 35-DCV carburetors. Output was 320 horsepower at 8,200 rpm. This is the same engine used by Maserati in 1957 in its Formula One 250.

Shelby suggested a 289-cubic inch Cobra competition engine, above, that would put out more useable horsepower and torque at more than 1,000 rpm less than the V12. I spent a day in August 1963 at Momo Competition after the Shelby-Ford 289, fitted by Al Momo with four Weber 4610-M1 carburetors, was installed and fired up. The 289’s headers were plumbed into rear exit quad megaphones. It had an incredible bark – much more raucous sounding than a competition Cobra. Rated at 340-horsepower at 7,000 rpm, the engine was fitted with ported and polished heads like the ones used on FIA Cobras, a Motorola alternator and Spalding Flamethrower ignition. It was shipped with an aluminum Cobra-Weber intake manifold sans carburetors, and a custom nine-quart oil pan.

Unlike previous Birdcages that Cunningham had raced, the COBRA IN A MASERATI BIRDCAGE! was the first to utilize a De Dion rear suspension with a five-speed gearbox and an interchangeable Fifth gear. To adapt the Cobra engine, Momo chopped the Ford bellhousing and utilized a Maserati flywheel and clutch. Clutch and throttle, linkage was converted to hydraulic-assist utilizing slave cylinders.

To compensate for the new powerplant, adjustable Armstrong shocks and beefier 42-mm knock-off hubs were added. An aluminum cross-flow radiator, aided by small vents in the aluminum rear body panels, cooled the fanless engine. Ready to race, the COBRA IN A MASERATI BIRDCAGE! weighed in at 1,400 pounds, exactly one pound less than with the V12!

With the help of Willem Oosthoek, author of Birdcage to Supercage and Larry Berman, Cunningham historian, we were able to track the Ford-powered Birdcage’s racing history. The first time out with Walt Hansgen driving, #64.002 took a Third overall at the Watkins Glen SCCA Nationals on August 24, 1963. Primary drivers were Cunningham, Augie Pabst and Paul Richards. Dr. Dick Thompson also spent some seat time in Tipo #64.002.

Over the years ownership of #64.002 passed from Cunningham to Pabst and then to Ham Vose. The COBRA IN A MASERATI BIRDCAGE! competed at the Bridgehampton Double 500, Los Angeles Times GP at Riverside and many regional events in 1963. The last big race it ran was the USRRC event at Augusta. In later years, still fitted with the Shelby Cobra engine, it was on display at the Blackhawk Collection.

For more information about the Birdcage Maserati, please visit https://en.wikipedia.org/wiki/Maserati_Tipo_61

CADILLAC V-SERIES HYPERCARS AT LE MANS

In June, CADILLAC V-SERIES HYPERCARS AT LE MANS will be going for the overall win in the Hypercar Class at the world’s premier endurance race.

CADILLAC V-SERIES HYPERCARS AT LE MANS

“We are thrilled to return to the  Circuit de la Sarthe for the 24 Hours of Le Mans with the full Cadillac Racing team,” said Global Vice President of Cadillac Rory Harvey. “Over the last 20 years Cadillac Racing has built a legacy of winning on the track and we feel very privileged to return to Le Mans during this exciting new electrified era in racing.”

The three Cadillac V-Series.R race cars made their competition debut January. 28-29 in the 61st Rolex 24 At Daytona, with the No. 01 Cadillac V-Series.R earning a podium finish. The No. 02 Cadillac V-Series.R placed fourth and the No. 31 Whelen Engineering Cadillac V-Series.R finished fifth. They will join other competitors in the Hypercar class with revised car numbers for the 24 Hours of Le Mans and contest for the overall win.

  • The No. 2 Cadillac V-Series.R received an automatic entry based on its full-season participation in the FIA World Endurance Championship. Earl Bamber, Alex Lynn and Richard Westbrook are the drivers.
  • The No. 3 Cadillac V-Series.R is a full-season IMSA WeatherTech SportsCar Championship entrant, where it races as the No. 01. Sébastien Bourdais, Renger van der Zande and Scott Dixon will be the drivers.
  • The No. 311 Whelen Engineering Cadillac V-Series.R is a full-season IMSA WeatherTech SportsCar Championship entrant, where it races as the No. 31. Pipo Derani, Alexander Sims and Jack Aitken will be the drivers.

“Cadillac is excited to build on its racing legacy by competing against the very best internationally and at one of the world’s toughest races,” said GM sports car program manager Laura Wontrop Klauser. “We’re proud to be representing the United States and the Cadillac V-Series.R is a great continuation of our racing heritage.”

The guiding principles for convergence of the top categories of endurance racing in IMSA and the WEC were announced in 2020. Design and development of the new race car began immediately.

The Cadillac V-Series.R design – co-developed by Cadillac Design, Cadillac Racing and chassis constructor Dallara – was influenced by the Project GTP Hypercar that was unveiled in June 2022. The race car incorporates distinctive Cadillac design elements, such as vertical lighting and floating blades.

CADILLAC V-SERIES HYPERCARS AT LE MANS feature all-new Cadillac 5.5L DOHC V-8 engines developed by GM’s Performance and Racing Propulsion team based in Pontiac, MI. The spec energy recovery system was developed by Bosch, Williams Advanced Engineering (now WAE) and Xtrac.

The Cadillac V-Series.R began on-track development in July 2022 and logged more than 12,400 miles (20,000 kilometers) on racetracks in the U.S. leading into the 2023 Rolex 24 At Daytona.

The first Cadillacs raced at Le Mans were entered by privateers Briggs Cunningham and Miles and Sam Collier in 1950. Both of these Series 61 coupes were powered by the Cadillac 5.4-liter OHV V-8 engine.

CADILLAC V-SERIES HYPERCARS AT LE MANSMiles and Sam Collier co-drove the No. 3 “Petit Pataud” to a 10th place overall finish.

Briggs Cunningham shared the wheel of the No. 2 “Le Monstre” with Phil Walters and finished 11th overall despite an early off-course incident. Vintage Cadillac photos: Mike Matune.

That same year, Sydney Allard and Tom Cole Jr. finished 3rd overall in the Cadillac powered Allard J2. Most recently, Cadillac competed at the 24 Hours of Le Mans in 2000, 2001 and 2002 with its 4.0L turbocharged V8-powered Northstar LMP.

For more information about CADILLAC V-SERIES HYPERCARS AT LE MANS and Cadillac’s road-racing heritage, please visit https://www.cadillac.com/world-of-cadillac/racing/heritage

CUNNINGHAM: 60th ANNIVERSARY C8 CORVETTE

CUNNINGHAM: 60th ANNIVERSARY C8 CORVETTE, Car # 33 of 60, debuts at Amelia Island Concours as part of a charity Sweepstakes benefitting CMAF.

CUNNINGHAM: 60th ANNIVERSARY C8 CORVETTE

The three original Cunningham C1 Corvettes and their racing history carry an enormous amount of prestige within the Corvette community, as well as those who support endurance racing.  The #3 Briggs Cunningham entry stands head and shoulders above all others, having won its class in the 1960 24 Hours of Le Mans.  Its story was chronicled in the 2011 Michael Brown Documentary, The Quest.  Fast forward 60 years and the Chip Miller Amyloidosis Foundation, CMAF, in conjunction with Cunningham Automotive, are proud to debut Cunningham #33 at the Amelia Island Concours d’ Elegance, May 20-23 at the Ritz Carlton, less than one hour north of downtown Jacksonville, FL.

Powered by a 600-horsepower Lingenfelter-built and tuned engine, it comes complete with a high-flow carbon fiber intake manifold, Corsa headers, HRE forged aluminum wheels, Michelin tires, Peter Stevens designed aero kit and Cunningham/MOV’IT performance brakes, and more. Not only will the car be on display with sweepstakes entries available to win it on October 1, it’ll be attended by CMAF president, Lance Miller, above, right.

“I’m very excited to see this car in person for the first time,” noted Miller.”  “I am confident that it will turn heads as it sits on display surrounded by blue-blood brands like Rolls Royce, Bugatti, Ferrari, Cord and more,” continued Miller. “When you come to the Foundation table, I look forward to talking with you about amyloidosis, the horrible disease that took my best friend and Dad, Chip Miller, from us in 2004. I am also looking forward to your support by way of this sweepstakes. Entries range from 12 tickets for $25 to 2,800 tickets for $2,500, and many more options in between.”

This sweepstakes is just one of many great ways you can support CMAF. There are events planned from now through August designed to raise awareness and money for amyloidosis. If you visit https://chipmiller.org/ you can learn more about more CMAF  PLUS all the ways you can enter to win our Sweepstakes #33 C8 Cunningham Corvette…and all the events you should consider attending in June, July and August 2021.

To learn more about the CUNNINGHAM: 60th ANNIVERSARY C8 CORVETTE debut at the Amelia Island Concours, and other opportunities, please visit https://www.ameliaconcours.org/https://www.carlisleevents.com/events/events-detail/index?id=corvettes at carlisle and  https://www.facebook.com/AmyloidosisAwareness