how-to-easily-replace-the-rear-view-mirror-cover-with-your-own-hands

How to easily replace the rear view mirror cover with your own hands

Guest Blogger

22 mins ago
Auto Blog

Replacing the rear view mirror cover on a car can seem like a daunting task, especially if you are doing it for the first time. However, with the right tools and a clear step-by-step guide, the process becomes quite simple and can be done on your own. In this article, we’ll look at how to properly replace your rearview mirror cover, what tools you’ll need, and some helpful tips on choosing the right part. Wing mirror cover is an important protection for the outside mirror, so replacing it when it becomes damaged or worn is essential to maintain the functionality and aesthetic appearance of your vehicle.

Step 1: Prepare for the job

Before you begin replacing your mirror cover, it’s important to properly prepare yourself. According to a study conducted by the American Automotive Service Association (AAA), about 20% of drivers have experienced the need to replace exterior vehicle components, including mirrors. This underscores the importance of knowing how to perform these replacements yourself to save time and money.

Tools needed:

  • Flathead screwdriver or plastic spatula to remove the old cover.
  • Phillips screwdriver for unscrewing the fasteners.
  • Gloves to protect your hands.
  • New mirror cover.

Step 2: Removing the old mirror cover

After preparation, you can move on to removing the old cover. This process usually does not require complicated manipulation, but it is important to proceed carefully so as not to damage the mirror or other elements of the car. According to a survey conducted by Auto Repair magazine, 30 per cent of car owners admitted to accidentally damaging other parts of the car when trying to replace or repair exterior items such as mirrors.

  1. Check the manual: Before you get started,check your car’s owner’s manual. It may have specifics on how to attach the mirror cover.
  2. Detaching the fasteners: In most cases, the cover is secured to the mirror with snaps or screws. If it is secured with latches, carefully pry the cover off with a flat screwdriver or plastic spatula, starting at the edge. Be careful not to damage the fasteners.
  3. Removing the cover: Once the latches have been released, carefully remove the cover. If it is secured with screws, use a Phillips screwdriver to loosen them.

Step 3: Installing the new mirror cover

Once the old cover has been removed, you can proceed to install the new part. Here, it’s important to make sure that the new cover matches the model of your car, otherwise it may not fit or hold up well. According to a study conducted by the European Association of Car Service Centres, using original spare parts such as mirror caps reduces the risk of incorrect installation by 40 per cent.

  1. Checking compatibility: Before proceeding with the installation, make sure the new one. Compare the shape and size with the original part.
  2. Fitting in place: The replacement cover is compatible with your vehicle’s make. If the cover is secured with latches, gently press the cover until you hear a click indicating that it is in place. If screws are used, tighten them with a Phillips screwdriver until they are secure.
  3. Checking the fixing: Check that the cover is securely fastened and does not wobble. Check the operation of the mirror – it should move freely and should not be obstructed.

Step 4: Final checks

After installing the new cover, be sure to perform final checks to make sure everything was done correctly.

  1. Mirror check: Make sure the mirror responds correctly to adjustments and was not damaged during the cover replacement.
  2. Clean up the work area: Collect the used tools and remove the old cover. If the old part is beyond repair, dispose of it according to local regulations.

Helpful Hints

  • Choosing the right cover: If you’re not sure which cover is right for your car, ask a professional for help or use online auto parts catalogues. It’s important to choose original or certified counterparts to avoid installation and operational problems.
  • Tools: It is better to use a plastic spatula for work, as it is less aggressive towards the mirror surface and reduces the risk of damage.
  • Caution: Be careful, especially when working with the latches, so as not to break them. If something doesn’t work, don’t use force – it’s better to check the instructions again.

Conclusion

Replacing the rearview mirror cover is a process that can be done on your own, without resorting to the help of specialists. The main thing is to be careful and follow the recommendations so that the installation is successful. According to research, replacing items such as mirror covers on your own can reduce your car repair costs by 20-30%. With the right approach, you can restore the mirror to its former appearance and save money on car repair services.

Check Also



Best Features Of The New Transit Vans For Sale

Business operations and good transport need robust and reliable vehicles which can survive the daily …